Products
Every piece of a copper gutter system
Fabricated in Cleburne in 16 oz or 20 oz copper. Pick a product to see its specs and build an estimate. Product photos are illustrative examples, in new and weathered copper: copper darkens to brown within months and greens over the years.
- Half-round and K-style profiles
- 5, 6 and 7 inch widths
- 16 oz and 20 oz copper
- Ships to any state
Category
Copper gutters
Half-round and K-style copper gutter, fabricated to length in 16 oz or 20 oz copper.
Category
Downspouts
Round and rectangular copper downspouts with matching elbows.
Category
Collector heads
Conductor heads that gather water from a scupper or gutter outlet into the downspout, and finish the run.
Category
Gutter accessories
End caps, miters, outlets, hangers and brackets, matched to each profile and size.
Category
Gutter guards
Copper guards that keep leaves out of the gutter and weather to the same tone as the run.
Materials and installation
Shipped anywhere, installed nearby
Materials are fabricated in Cleburne and shipped to any state. Installation is a separate, local service for addresses near Cleburne, Texas, confirmed by ZIP code when you request a quote.
Product questions
Common questions about copper gutters
Half-round is the traditional look and drains cleanly; it hangs on visible hangers. K-style has a flat back and an ogee front, carries more water for its width and takes hidden hangers. Most houses built after the 1960s have K-style; older houses and metal roofs often suit half-round.
16 oz is the common residential weight and is what most houses need. 20 oz is thicker and stiffer, for long runs, large roof areas, commercial work or anywhere the gutter takes snow and ice loads.
Walk the house and measure each run along the fascia. Add the runs for total linear feet, then count outside corners, inside corners, ends that need a cap and the number of downspouts. That is everything the configurator asks for.
Near Cleburne, Texas, yes. Everywhere else we ship the materials to you or your contractor. Installation is always a separate line from materials.
Know what you need? Price it.
The configurator turns your measurements into an estimate and a quote request.